Monday, January 16, 2017
Painting Wing Fittings
Subscribe to:
Post Comments (Atom)
skip to main |
skip to sidebar
I've been grit blasting and painting all the fittings for attaching the wings, struts, etc. This is about half of them. After painting with Zinc Chromate primer and Black Enamel I load them in my oven and bake them. The four 100 watt bulbs get it to 225 - 250 degrees F which cooks them nicely in about 2 hours.
Fly Baby as Finished in 1966
This blog records the history of Building, Flying and Changing our Fly Baby. The plane is alive and well so this will be an ongoing story. The principals in this story are Ernest and Dennis Harbin. All the family and many friends participated in this adventure. Ernie and Dennis will both make comments in posts. We both saw all this through our own eyes and remember things differently, so you'll get our thoughts and memories.
Fly Baby and Ernie
Fly Baby as Finished in 1966
For Your Info
Postings to this are being entered as we do things or have time to write about things we've learned. You'll see the latest entry at the top of the page.
If you're new to this blog you might want to go back and read from the start. There is also a subject index to help you find postings on specific subject areas.
Last things, click on a picture to enlarge it, click the Play > on videos to watch them (they may take a few minutes to load on a slow connection).
If you're new to this blog you might want to go back and read from the start. There is also a subject index to help you find postings on specific subject areas.
Last things, click on a picture to enlarge it, click the Play > on videos to watch them (they may take a few minutes to load on a slow connection).
Subjects
- Biplane (9)
- Brakes (4)
- Cockpit Cover (1)
- Controls (13)
- Covering (41)
- Cowling (26)
- Engine (55)
- Flying (46)
- Fuselage (28)
- Gas Tank (11)
- General Info (43)
- Instruments (4)
- Landing Gear (5)
- Lewis Gun (2)
- Other Pilots (1)
- Paint (11)
- Radio (1)
- Repairs (15)
- Rigging (16)
- Seat (2)
- SPAD (2)
- Tail Surfaces (6)
- Test Flight (4)
- Tools (51)
- Trailer (16)
- Weight and Balance (1)
- Welding (6)
- Wing Stands (4)
- Wings (65)
Blog Archive
-
▼
2017
(35)
-
▼
January
(11)
- Finishing Tapes on Aileron Ribs
- Rib Tapes On The Last Wing Panels
- Remaining Wing Rigging Fittings Painted
- Painting Wing Fittings
- Wire Dispenser for Wrapping Cable Splices
- Improved Thumb Wheel for the Cable Splicing Clamp
- Nicopress Sleeve and Wire Wrap Process for Cable T...
- First Cable End With 22 Gauge Wire
- New Batch of Flux is Amazing
- Soldering Cable Ends
- Rib Tapes on Upper Right Wing
-
▼
January
(11)
No comments:
Post a Comment