We've had some soggy weather which was good for wet sanding all the surfaces which had 2 coats of Poly-Spray. I used 400 grit paper and just sanded enough to remove any dust, etc. I didn't think they were very rough but after sanding they are so much smoother. It was well worth the effort and time.
Today was warm and dry so I was able to get the second coat of Poly-Spray on the last wing panel. when we get some more dry weather I'll be ready to put more Poly-Spray, to replace what I sanded off. After that I'll have to start on the colors. I have the Poly-Tone for the lower surfaces. I need to order the clear to mix the colors for the upper surfaces.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment