Wings Sanded - Last Coat of Poly Spray

 The last wing was sanded and a final coat of Poly-Spray applied to everything.

You can see the generally light sanding in this picture.  There are no big bear spots after sanding.

 All you are doing is knocking down the high spots from dust, etc.

The edges of the tapes get sanded just enough to remove any sharp edge along the pinking.  I didn't sand along the cap strips so I wouldn't accidentally sand through the tapes at the rib stitching.  You could carefully sand between the stitching, I didn't.

I'm ready to start painting colors when we get some more dry weather.